Brian S. Stephan
fc022452f5
replace most references to pico with RP2040
2023-11-07 00:26:51 -06:00
Brian S. Stephan
fcb1297139
test with 0.7.5 files, which has an expanded config section
2023-11-06 23:55:01 -06:00
Brian S. Stephan
d2ef3efa3b
trivial reordering of command line flags
2023-07-12 18:32:05 -05:00
Brian S. Stephan
cce165f012
add flag to have concatenate write direct to USB
2023-07-12 17:50:43 -05:00
Brian S. Stephan
fb1729a957
write in 4096 byte chunks
2023-07-12 17:33:12 -05:00
Brian S. Stephan
8c5bd4397f
allow edit-config to fallback to new config if old doesn't exist
2023-07-12 00:08:55 -05:00
Brian S. Stephan
6a147aa1d8
attempt to address USB corruption by padding more
2023-07-11 23:28:34 -05:00
Brian S. Stephan
a7b8309b33
--replace-extra to overwrite config area when concatenating
2023-07-11 18:36:17 -05:00
Brian S. Stephan
baa3959e8a
dump-config's filename argument is not optional
2023-07-11 16:32:46 -05:00
Brian S. Stephan
b7bb437ae8
command to dump whole GP2040-CE image from USB
2023-07-11 16:27:01 -05:00
Brian S. Stephan
2f5a99b695
use proper field descriptor when checking missing children
2023-07-10 16:00:26 -05:00
Brian S. Stephan
853283e69c
edit-config over USB
2023-07-09 10:47:27 -05:00
Brian S. Stephan
5bcb3dba3f
method to write the config over USB at the proper alignment
2023-07-09 10:03:44 -05:00
Brian S. Stephan
2d024c5b34
pico.write must happen at 256 byte boundaries
...
there's no good way to tell if the payload should be padded or if it
should just be realigned, so raise an exception and make the caller
figure it out
2023-07-09 09:16:55 -05:00
Brian S. Stephan
c25f6f4fd3
add command for writing to the BOOTSEL Pico
2023-07-08 23:48:47 -05:00
Brian S. Stephan
a1e3955a1f
add command to erase a section of flash
...
used by picotool as part of the write, so we'll do the same
2023-07-08 23:25:38 -05:00
Brian S. Stephan
7a9d5ad1d1
dump-config tool to easily backup a board's config section
...
doesn't require picotool, doesn't include padding, does include the
footer
2023-07-07 20:09:00 -05:00
Brian S. Stephan
e2ad75371e
DRY: convenience method to get config from USB
2023-07-07 20:03:41 -05:00
Brian S. Stephan
0378269a00
--usb flag to edit-config direct off the board
2023-07-07 18:58:25 -05:00
Brian S. Stephan
70d3ce8be0
--usb flag to visualize-storage direct off the board
2023-07-07 18:31:13 -05:00
Brian S. Stephan
10dcd149cc
add methods to read directly off the board over USB
2023-07-07 16:45:07 -05:00
Brian S. Stephan
772ae953f0
add method to reboot a pico (in BOOTSEL)
2023-07-06 16:07:06 -05:00
Brian S. Stephan
221f45557e
support the adding of new repeated elements
...
take for instance:
repeated AlternativePinMappings alternativePinMappings = 1 [(nanopb).max_count = 3];
this, in C, creates a three-struct-sized array alternativePinMappings[].
in python, this is the same idea, where profileOptions' field is a
special container to which AlternativePinMappings can be added. this
allows adding elements via the UI. it does *NOT* implement limits (yet?)
so you can add more (and I think the board will just ignore them and
drop them on write)
2023-07-01 17:05:19 -05:00
Brian S. Stephan
c60a5e784d
refactor to retain field_value in case it is a message
...
we can save some config lookups in this case (in particular in the case
where we are working with repeateds and the lookup against an iterable
won't work)
2023-07-01 13:00:48 -05:00
Brian S. Stephan
71f6af624e
refactor to add a node outside of the main tree builder
2023-07-01 12:24:31 -05:00
Brian S. Stephan
7aee99ef4f
allow for "opening" an empty config from file
2023-06-30 23:12:53 -05:00
Brian S. Stephan
7d5052e811
add edit-config, a Textual TUI for editing a configuration
...
this tree UI allows for viewing and basic editing of a configuration
section from a board. it does a decent job of displaying most of the
settings, and editing is equally convenient, as in it tries to handle
enums correctly, but doesn't validate pins or handle long binary strings
well.
saving is done in place --- if a config/storage section was opened, a
config section (no padding) is what results. if a whole board was
opened, the whole binary is rewritten with the new offset config
section. this way, a whole board dump can be changed in place, or a new
config can be made for use in e.g. concatenate to build an image
many enhancements to come over time
2023-06-30 02:01:01 -05:00
Brian S. Stephan
9b43ac824d
add more methods for writing a config to file
...
these allow for adding a config to the proper section of an existing
binary file, or writing a config to a new config-only binary file
2023-06-29 14:43:46 -05:00
Brian S. Stephan
cbf0f52841
add method to generate a serialized + footer config
2023-06-28 19:21:27 -05:00
Brian S. Stephan
1345e8b18d
add length info to exceptions complaining about length
2023-06-28 14:38:13 -05:00
Brian S. Stephan
39fa558741
check the config's CRC32 checksum while reading
2023-06-28 14:38:10 -05:00
Brian S. Stephan
095fac19f1
properly account for combining config section with firmware
...
prior to this, the concatenate assumed it was concatenating a firmware
with a full *storage section*, e.g. the already-padded 8192 bytes, but
it's equally valuable now that I'm creating configs to have just a
config section + footer, which needs to be padded 8192. now concatenate
supports both
2023-06-28 12:52:49 -05:00
Brian S. Stephan
85d84144fc
concatenate command: combine firmware and storage into one file
2023-06-26 15:32:32 -05:00
Brian S. Stephan
229092dd66
custom config validation exceptions
...
might be useful when allowing for ignoring specific sanity checks
2023-06-22 00:08:12 -05:00
Brian S. Stephan
1b02e458e2
visualize-storage flag to print as JSON
...
closes #3
2023-06-21 18:21:22 -05:00
Brian S. Stephan
88ca5c5152
more tests for command invocations
2023-06-21 17:54:27 -05:00
Brian S. Stephan
5b8dc456f1
option to get the config out of a whole board dump
...
now you don't need to fiddle with specific byte ranges of a dump, you
can just dump the whole board if that's more convenient, and
visualize-storage will parse that
also more testing in general
2023-06-21 15:20:21 -05:00
Brian S. Stephan
d31c451d0c
tox for local CI, with coverage and bandit checks added
2023-06-21 12:31:58 -05:00
Brian S. Stephan
54035de00a
add pytest, test creation/import of config_pb2 module
2023-06-20 19:57:38 -05:00
Brian S. Stephan
0c7ed1fcea
improve storage parsing by using footer for sanity
...
magic is checked for sanity, and then the size is used for reading the
whole section rather than simply ignoring null bytes
closes #2
2023-06-20 19:57:28 -05:00
Brian S. Stephan
a55bea087c
add help text to the --version flag
2023-06-20 18:19:50 -05:00
Brian S. Stephan
dbd392cade
set up some sane-ish logging defaults
2023-06-20 18:17:46 -05:00
Brian S. Stephan
518aae359d
provide shortcut for the proto file path option
2023-06-20 15:45:31 -05:00
Brian S. Stephan
35abad327e
dynamically generate version number based on git
2023-06-20 15:43:21 -05:00
Brian S. Stephan
1302cb914c
correct wording of what get_config_pb2 is doing
2023-06-20 13:30:48 -05:00
Brian S. Stephan
8891dcc2f4
minor documentation cleanups
2023-06-20 12:59:47 -05:00
Brian S. Stephan
24617bf920
visualize-storage tool --- read GP2040-CE config
...
this also comes with a lot of project scaffolding for (IMO) a
well-organized python project. this should get the ball rolling for
other devs
2023-06-20 12:52:22 -05:00