# BSS Arcade Edition

Pieces for mounting to a Qanba 2009 in order to create the Buildable Stick System - Arcade Edition.

## Pieces

* 4 `interconnect-x` --- creating the internal support for joining two rows of panels
* 6 `frames/pieces/interconnect` --- (core project) the standard piece for joining two+ columns of panels
* 4 `extended-side-no-back` --- the extended side pieces, flush on the back to connect to each other
* 4 `frames/pieces/extended/front-or-back` --- (core project) the front extended piece
* 2 `extended-back` --- a small piece that fits into the Qanba 2009 "lip" for running cables
* 1 `extended-back-left-mount`
* 1 `extended-back-right-mount` --- extended back pieces that can be mounted to the Qanba 2009 base
* 1 `panel-front-left-mount`
* 1 `panel-front-right-mount` --- blank panels that can be mounted to the Qanba 2009 base
* 6 `panels/inset/panel` --- the rest of the bottom panels
* 4 `panels/inset/` panels of your choice for the front controls
* 2 `panel-three-aux-buttons` --- for aux controls in the back row
* 2 `panel-three-aux-buttons-and-rocker-hole` --- for aux controls and the wired rocker in the back row
* 4 `decorative-plate-aux-control-tight-three-button-cluster` --- for decorating the aux control clusters
* 4 `src/misc/` decorative plates of your choice for the front controls, and similar miscellany
* 4 `mount-spacer` --- making a flush mount between the enclosure and the base

## Hardware

* 32 45mm M4 hex brass standoffs (or equivalent) for each panel/frame compartment
* 64 8-12mm M4 countersunk hex bolts for attaching panels to the compartments
* 4 8-12mm M3 hex bolts and 4 M3 flange nuts for attaching rocker switches to the back panels
* 4 40mm M6 bolts for connecting the enclosure to the base
* 4 M6 flange nuts

## Components

* 2 controller boards, e.g. the RP2040 Advanced Breakout Board
* buttons and/or levers as desired
* necessary wiring

For the rest of the build (e.g. mounting a level to a panel), see the core README.