the bottom panel had a basin or tray to make room for taller levers,
namely the Seimitsu LSX-NOBI that I really like. per its specs, the
lever needs 43.70mm internally, and the old values were too tight (55mm
- 19mm from panels - 2mm from lever plate = 43) so the bottom panel was
arbitrarily given a sunken portion (somewhat arbitrarily 2.5mm) to
compensate at the time, because I already had frames printed.
adding 2mm to the frame Z covers the difference (57mm - 10mm - 2mm =
45mm) and thus we don't need the bottom panel hack anymore. I also
suspect the bottom panel basin was slightly affecting it structurally,
so this may help that.
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
license is still the same, this just saves duplicating the terms and
standardizes with what I've been doing elsewhere, style-wise
Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
this allows for:
include <parameters.scad>
// override a variable such as
frame_z = 60;
include <components.scad>
which will let individual components tweak settings, e.g. the height of
a frame
this complicates the print, in that now printing the frame requires
supports, but by cutting in on the bottom the same way as the top, we
can center some stuff better and also make the plates a bit more
interchangeable. this also eliminates the slightly unsightly bottom
panel hanging out in the open, so overall I think it's worth the
printing complication
Brian S. Stephan