From e68409fc6170688239236fc86ebbb76ce9882f4e Mon Sep 17 00:00:00 2001
From: "Brian S. Stephan" <bss@incorporeal.org>
Date: Tue, 4 Mar 2025 20:42:21 -0600
Subject: [PATCH] remove front-or-back-longish.scad, but use the piece
 elsewhere

the piece was not meant to be printed (at least not until/unless there
is a side that extends out the extra length of the front and back, which
seems unlikely), but the piece is used to create the inner wall that
juts out through windowed pieces, so we're going to keep it and just
stash it in front-or-back.scad

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
---
 ...-or-back-inner-wall-for-horiz-stripes.scad |  2 +-
 src/frames/pieces/front-or-back-longish.scad  | 30 -------------------
 src/frames/pieces/front-or-back.scad          | 18 +++++++++++
 3 files changed, 19 insertions(+), 31 deletions(-)
 delete mode 100644 src/frames/pieces/front-or-back-longish.scad

diff --git a/src/frames/pieces/front-or-back-inner-wall-for-horiz-stripes.scad b/src/frames/pieces/front-or-back-inner-wall-for-horiz-stripes.scad
index 1f02e56..25edb4f 100644
--- a/src/frames/pieces/front-or-back-inner-wall-for-horiz-stripes.scad
+++ b/src/frames/pieces/front-or-back-inner-wall-for-horiz-stripes.scad
@@ -6,8 +6,8 @@
 
 include <parameters.scad>
 include <components.scad>
+use <front-or-back.scad>
 use <front-or-back-inner-wall.scad>
-use <front-or-back-longish.scad>
 use <front-or-back-windowed-horiz-stripes.scad>
 
 // for stability's sake, this piece juts out a bit from the outside of the wall, so we
diff --git a/src/frames/pieces/front-or-back-longish.scad b/src/frames/pieces/front-or-back-longish.scad
deleted file mode 100644
index b83bfc4..0000000
--- a/src/frames/pieces/front-or-back-longish.scad
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * SPDX-FileCopyrightText: © 2025 Brian S. Stephan <bss@incorporeal.org>
- * SPDX-License-Identifier: GPL-3.0-or-later
- */
-
-include <parameters.scad>
-include <components.scad>
-use <front-or-back.scad>
-
-module front_or_back_frame_piece_wall() {
-	// get a slice of the whole wall, to use it for making the extended version
-	difference() {
-		front_or_back_frame_piece();
-		cube([frame_x, frame_y-frame_wall*2, frame_z], center=true);
-	}
-}
-
-module front_or_back_frame_piece_extension() {
-	hull() {
-		front_or_back_frame_piece_wall();
-		translate([0, -frame_bevel_height*2, 0]) front_or_back_frame_piece_wall();
-	}
-}
-
-module front_or_back_longish_frame_piece() {
-	front_or_back_frame_piece_extension();
-	front_or_back_frame_piece();
-}
-
-front_or_back_longish_frame_piece();
diff --git a/src/frames/pieces/front-or-back.scad b/src/frames/pieces/front-or-back.scad
index b37d9b2..96d63f4 100644
--- a/src/frames/pieces/front-or-back.scad
+++ b/src/frames/pieces/front-or-back.scad
@@ -24,4 +24,22 @@ module front_or_back_frame_piece() {
 	}
 }
 
+// this is here for use in inner wall pieces, but
+// front_or_back_longish_frame_piece is not printable
+// so we'll just stash it here for now
+module front_or_back_frame_piece_extension() {
+	hull() {
+		front_or_back_frame_piece_wall();
+		translate([0, -frame_bevel_height*2, 0]) front_or_back_frame_piece_wall();
+	}
+}
+
+// this is here for use in inner wall pieces, but
+// front_or_back_longish_frame_piece is not printable
+// so we'll just stash it here for now
+module front_or_back_longish_frame_piece() {
+	front_or_back_frame_piece_extension();
+	front_or_back_frame_piece();
+}
+
 front_or_back_frame_piece();