From c67722d0da67f7c34cfe5472c9b2d2e358271b78 Mon Sep 17 00:00:00 2001 From: "Brian S. Stephan" Date: Sun, 17 Sep 2023 11:29:31 -0500 Subject: [PATCH] simple button outline for a single 24mm button --- src/misc-decorative-plate-24mm-button.scad | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 src/misc-decorative-plate-24mm-button.scad diff --git a/src/misc-decorative-plate-24mm-button.scad b/src/misc-decorative-plate-24mm-button.scad new file mode 100644 index 0000000..0c82a5e --- /dev/null +++ b/src/misc-decorative-plate-24mm-button.scad @@ -0,0 +1,33 @@ +/* Copyright Brian Stephan 2023 + * + * This file is part of the Buildable Stick System. + * + * The Buildable Stick System is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by the + * Free Software Foundation, either version 3 of the License, or (at your + * option) any later version. + * + * The Buildable Stick System is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * the Buildable Stick System. If not, see . + */ + +include + +module button_24mm_decorative_plate() { + difference() { + decorative_add=10; + // get a 1mm slice of the bigger button cylinders + translate([0, 0, -45]) button_24mm_hole(); + translate([0, 0, -50]) cube([500, 500, 98], center=true); + translate([0, 0, 50]) cube([500, 500, 98], center=true); + // cut out the normal holes + translate([0, 0, -1]) button_24mm_hole(); + } +} + +button_24mm_decorative_plate();