From 70b45fa18bd77eb1b78cdddf4208a86668f7ad69 Mon Sep 17 00:00:00 2001
From: "Brian S. Stephan" <bss@incorporeal.org>
Date: Wed, 1 May 2024 08:11:40 -0500
Subject: [PATCH] make a fancy mount for showing off sticks

Signed-off-by: Brian S. Stephan <bss@incorporeal.org>
---
 src/extras/mount.scad | 68 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 src/extras/mount.scad

diff --git a/src/extras/mount.scad b/src/extras/mount.scad
new file mode 100644
index 0000000..23bf123
--- /dev/null
+++ b/src/extras/mount.scad
@@ -0,0 +1,68 @@
+/*
+ * A stick mount that fits rectangular (non-extended) BSS sticks.
+ *
+ * SPDX-FileCopyrightText: © 2024 Brian S. Stephan <bss@incorporeal.org>
+ * SPDX-License-Identifier: GPL-3.0-or-later
+ */
+
+include <../parameters.scad>
+include <../components.scad>
+
+holder_x = 114;
+holder_y = 60;
+holder_z = 45;
+tall_holder_post = frame_y-10;
+
+module stick_holder() {
+	difference() {
+		cube([holder_x, holder_y, holder_z], center=true);
+		translate([14, 0, 132]) rotate([90, -40, 0]) frame_solid();
+	}
+}
+
+module mount() {
+	difference() {
+		union() {
+			// lowest post
+			translate([62, -frame_z-25, holder_z/2]) stick_holder();				// top = 45
+
+			// middle post
+			translate([0, 0, ((tall_holder_post)/2)/2])
+				cube([holder_x, holder_y, (tall_holder_post)/2], center=true);
+			translate([0, 0, ((tall_holder_post)/2)+holder_z/2]) stick_holder();			// top = 139
+
+			// highest post
+			translate([-62, frame_z+25, tall_holder_post/2])
+				cube([holder_x, holder_y, tall_holder_post], center=true);
+			translate([-62, frame_z+25, tall_holder_post+holder_z/2]) stick_holder();		// top = 233
+
+			// post stabilizers
+			translate([31, -41, holder_z/2]) cube([52, 23, holder_z], center=true);
+			translate([-31, 41, ((tall_holder_post/2)+holder_z)/2])
+				cube([52, 23, (tall_holder_post/2)+holder_z], center=true);
+
+			// base
+			hull() {
+				translate([110, 103, -2.5]) cylinder(r=15, h=5, center=true);
+				translate([110, -103, -2.5]) cylinder(r=15, h=5, center=true);
+				translate([-110, 103, -2.5]) cylinder(r=15, h=5, center=true);
+				translate([-110, -103, -2.5]) cylinder(r=15, h=5, center=true);
+			}
+
+			// placard
+			translate([0, -112, 15]) cube([frame_y, 5, 30], center=true);
+
+			/* // test */
+			/* translate([62+14, -frame_z-25, 132+holder_z/2]) rotate([90, -40, 0]) frame_solid(); */
+			/* translate([14, 0, 132+(frame_y/2)-20+holder_z/2]) rotate([90, -40, 0]) frame_solid(); */
+			/* translate([-62+14, frame_z+25, 132+tall_holder_post+holder_z/2]) rotate([90, -40, 0]) frame_solid(); */
+		}
+		// text on the placard
+		translate([-frame_z*3.3/2.5, -holder_x, 15]) rotate([90, 0, 0])
+			linear_extrude(1) text("Buildable Stick System", font="Noto Sans");
+		translate([-frame_z*3.3/2.5, -holder_x, 4]) rotate([90, 0, 0])
+			linear_extrude(1) text("v4 by bss", font="Noto Sans", size=6);
+	}
+}
+
+mount();